View Catalogue  
Request Catalogue  

Multitreat TC Boiler Water Treatment 5L
Multitreat TC Boiler Water Treatment 5L Multitreat TC Boiler Water Treatment 5L Multitreat TC Boiler Water Treatment 5L

Multitreat TC Boiler Water Treatment 5L

Multitreat TC Boiler Water Treatment 5L
Our Gold Standard product and simply the best "All in One" treatment, incorporating a blend of multipurpose scale and corrosion inhibitors that combat poor quality of feed water pick up that can contaminate and add to excess corrosion. For copper and brass, specifically for where high pH levels are present in the feed water, we add an organic Azole to film and protect yellow metal. An ideal treatment not only for steel boilers but for copper boilers or small vertical boilers with copper fire tubes and corrosion protection of boiler fittings.

Application
Multitreat TC is a liquid blend of oxygen scavenger, polmeric sludge conditioner organic azole (which in its formulation is an excellent corrosion inhibitor for Copper, Brass and its alloys. Therefore ideal for use in copper boilers or small vertical boilers with copper fire tubes and for corrosion protection of boiler fittings) and alkalinity builder for the treatment of feed waters for hot water systems and in particular preserved steam locomotive boilers where both the feed water and boiler water remain static for long periods out of use.

Multitreat TC is a single pack treatment that acts first to minimize corrosion whilst the boiler is sitting doing nothing and secondly acts to stop the build up of scale on the inner surface of the boiler by keeping the calcium and magnesium salts present in the water mobile and so preventing them from sticking to the exposed metal surfaces of the boiler

Multitreat TC is a Tannin based water treatment that is preferred for use in cold feed water and in particular where the boiler is out of use periodically. The Tannin molecule is able; within its complex chemical structure to absorb oxygen from the feed water and at the same time form a protective iron tannate film on the exposed metal surfaces.

Dosing
Multitreat TC should be dosed directly into the cold feed water tanks. The precise dose rate will be difficult to define and will depends on the quality and hardness of the water supply. It is appreciated that without the use of chemical test kits and the variation of water supply dosing is very much guess work. As a guide we would suggest adding at the start of the season about a half pint (250ml) to the cold feed water tanks and allow this to feed into the boiler. The amount of treatment can be judged by the colour of the boiler water in the gauge glass, which should have the appearance of ‘Tea’ or ‘Bitter Ale’. If the appearance is more like ‘Guinness’ or you can’t see through it, then it is likely that the dosage is too high. When the watercolour is weakened to that or ‘Lager’ it is likely you need to add further treatment to the feed water. For model boilers we would recommend no more than a cap full to add to the water tank to start off or in a relevant proportion to these guidelines. Dosage is ideal at 0.3% or 3000ppm.
Prolonged over dosing of the boiler water should be avoided.

Product Code MULTI-TC-5L
Why Use MultiTreat?

The only Water Treatment with Added Corrosion Inhibitors to Combat Poor Quality Water
The MULTITREAT range of 'All in One' Treatments specifically formulated to Protect Steel & Copper Heritage Boilers and Bronze Fittings, not only from caustic corrosion but also from Poor Quality Feed Water.

  • 20 Years Experience with Positive feedback from our customers
  • Traditional Tannin based that forms an iron tannate film to protect corrosion on exposed metal surfaces when the boiler is out of use.
  • Provides added protection for Steel and Copper boilers and Bronze fittings.
  • Combats poor quality feed water from a wide range of sources.
  • MULTITREAT TC and TV contain a yellow metal inhibitor to enhance copper alloy corrosion protection from high levels of caustic salts found in some untreated feed waters.
  • Use of Sodium Carbonate as an alkalinity builder and scale conditioner is far less corrosive than otherwise found in water treatment products that are more suited to modern steam boilers, reducing the potential of caustic cracking and corrosion in heritage boilers within riveted and overlapping seams.
  • MULTITREAT products are specifically suited to heritage boilers and application, preventing the likelihood of overdosing and excessive carry over (Priming) of water into the steam space.

Datasheets & Downloads


Product Code: MULTI-TC-5L

Excl. VAT: £45.11

Incl. VAT: £54.13

Product Alternatives

Multitreat TC Boiler Water Treatment 1L

Excl. VAT: £16.69

Incl. VAT: £20.03

Multitreat TC Boiler Water Treatment 12.5 kg

Excl. VAT: £90.01

Incl. VAT: £108.01

Multitreat TC Boiler Water Treatment (22.22 ltrs)

Excl. VAT: £171.78

Incl. VAT: £206.14

Follow Us