Contact Spray Adhesive Aerosol 500ml
Contact Spray Adhesive Aerosol
500ml
A high strength, non-chlorinated, exceptionally powerful, long lasting multi-purpose adhesive.
Gives exceptionally strong adhesion for a wide range of demanding uses. Fitted with a variable discharge spray that controls the width of the fan. DCM Free.
Use on wood, concrete, stone, tiles, rubber, foam, metals, rigid plastics, polyethylene, canvas fabrics, cardboard, paper and cork.
Contains no damaging or harmful materials such as CFC's or Methylene Chloride (Dichloromethane).
Applications
Suitable for use in repair and non-structural applications where a high strength bond is required.
| Product Code | 70-055 |
|---|
Application
SHAKE WELL BEFORE USE. ONLY USE IN WELL VENTILATED AREAS.
• Ensure surfaces are clean, dry and free from any contaminates that may hinder adhesion.
• For best results; use in temperatures between 15 and 25°C.
• Apply to the surface holding the can approx. 25cm away. For a strong bond apply to both surfaces, for a lighter bond apply to only one.
• Leave the solvent content of the adhesive to evaporate for 3 - 5 minutes before bringing the surfaces and applying pressure, working outwards from the centre.
• Excess adhesive is easily removed by using solvent / lighter fluid, etc.
• When finished; invert the can and spray for a few seconds in order the clear the valve ready for the next use
Limitations
Not recommended for use on polystyrene or plasticised PVC. Note: This product should not be used for construction purposes such as unsupported head linings in vehicles and boats. It is NOT suitable for use with non rigid / plasticised PVC and should not be used on surfaces where temperatures may exceed 50°C.
Product Code: 70-055
Excl. VAT: £8.28
Incl. VAT: £9.94
