Original Rust Remover Thick Brush on Gel 150g
Original Rust Remover Thick Brush on Gel
150g
- Features
- 150g Rust Remover Gel helps to remove rust from almost any metal object
- Non-drip formula ensures it won’t run and makes it perfect for use on vertical surfaces
- Chemically reacts with the rust, making it easy to remove.
- The thick liquid rust remover works well for threaded surfaces which cannot be immersed
- Perfect for treating small areas of rust on cars, such as stone chips, as well as on bikes, household appliances, tools and gardening equipment
Perfect for removing rust from almost any metal object. This tried and trusted product is the ideal solution for dealing with the difficult problem of rust on any iron or steel-based metal. You can even use it to remove the light oxide film created by shot blasting, ensuring a smooth, clean finish ready for priming and painting.
Original Rust Remover is simple to use. It can be applied with a brush and the non-drip formula ensures that it won’t run, meaning it’s ideal for use on vertical surfaces. This rust remover jelly is excellent for treating small areas of rust on cars, such as stone chips, as well as on bikes, household appliances, tools and gardening equipment.
| Product Code | JEN-LRR-150G |
|---|
HOW TO USE
Remove all traces of oil or grease. Remove old paint and loose rust with steel wool or wire brush.
APPLY DIRECTLY TO RUST
Pour the required amount into a plastic container. Brush liberally, directly onto rusty areas only. Keep active by working in with a brush every 5 minutes and adding more if required. Do not allow the surface to dry out or become tacky.
Vertical surfaces may require the most attention. Continue this process until all visible rust has turned dark grey in colour, at which point, wipe the surface dry with a clean, lint-free cloth. To ensure all rust has been successfully removed, brush away the dark grey residue with a wire brush/steel wool (if rust is still present thereafter, repeat the process as above until all rust has been removed).
FOR IMMERSION
Small components can be immersed in a plastic container. Leave until the rust has been removed, drain excess liquid for one minute. Wipe dry immediately with a clean lint-free cloth.
READY TO PRIME IN 30 MINUTES
After wiping dry, wait for 30 minutes, then apply Jenolite Primer or topcoat. For best results, prime same day. Always check product compatibility. If in doubt test a small area first.
Do not return excess Rust Remover to the container. Wash brushes and equipment in clean water immediately after use. Splashes onto surrounding paintwork and skin may cause staining – wash off immediately with water.
Product Code: JEN-LRR-150G
Excl. VAT: £11.57
Incl. VAT: £13.88
