Dynamic DescalerView products
ENVIRONMENTALLY SAFE TO DISPOSE OF IN DOMESTIC FOUL DRAINS SUCCESSFUL IN DESCALING BOTH MODEL, MINIATURE AND FULL SIZE ENGINE BOILERS
Dynamic Descaler is a revolutionary liquid descaler that rapidly dissolves all water scale and lime along with mud, rust and other non-soluble sedimentation deposits safely and effectively.
Dynamic Descaler does not corrode, pit, erode or have any other harmful effects on materials and metals such as; Copper, Brass, Mild Steel, Cast Iron, Plastic, uPVC, Glass, Seal but NOT on Aluminium and some Stainless Steel applications. You can clean your equipment IN-SITU (and sometimes without shutting down the machine).
Simple & Effective
Dynamic Descaler can dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. Because Dynamic Descaler is free rinsing, there is no need to neutralize or pacify the system. The uniqueness of Dynamic Descaler allows you to clean some equipment while still in operation, using a minimum of your personnel.
Won't harm the environment.
Won't harm workers.
Compare cost to other products and cleaning options.
Equipment is cleaned within a few hours.
Superior Corrosion inhibitors
Lowest corrosion rate of any descaler.
Powerful detergents and penetrating agents.
WE WOULD ALWAYS RECOMMEND THE APPLICATION OF OUR 'MULTITREAT BOILER WATER TREATMENT' FOLLOWING DESCALING
Why use Dynamic Descaler?
- It is a safe non-toxic, biodegradable chemical to be used on the waterside of heat transfer equipment.
- You do not have to heat Dynamic Descaler.
- Dynamic Descaler is safer for the employees to use than other acid products.
- Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).
- Cleans down to the original surface without pitting.
- Dynamic Descaler is safe to use on copper, brass, mild steel, cast iron, plastic, uPVC, glass, seals but NOT on Aluminium and some stainless steel applications.
- Dynamic Descaler will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
- Removing the scale build up allows your equipment to operate more efficiently with less down time.
- Holding Tanks
- Vacuum Pumps
- Oil Coolers
- Heating Elements
- Dynamic Descaler is suitable for a wide range of applications including the following:
- Heat Exhangers
- Cooling Towers
- Vacuum Pumps
- Water Piping