WrapSeal

WrapSeal

• WrapSeal™ is perfect for:
• Pipework and plumbing repairs
• Leaking connections and fittings
• Corrosion protection
• Waterproofing
• Emergency O-rings and seals
• Emergency hose repair

Instructions for use:
Wrap the tape around the product by stretching and overlapping onto itself. Stretch at least double to ensure a good bond (for high pressure leaks stretch to the maximum amount). The tighter WrapSeal™ is applied, the quicker and stronger the bond

Continue applying WrapSeal™ Tape around the product by overlapping 50% onto itself so that ½ the width is covered with the next wrap. The first and last wrap should completely overlap onto the previous wrap for a complete bond. Additional layers will provide additional strength. 3–5 layers or more may be necessary to repair a high pressure leak. WrapSeal™ works on either side.

Repositioning WrapSeal™ Tape is only possible for the first few seconds after wrapping. Attempting to reposition WrapSeal™ after fusing begins is not recommended. WrapSeal™ is not reusable. Additional WrapSeal™ can be applied over the product at any time in the future to add additional strength.

WrapSeal™ resists fuels, acids, solvents, salt water, road salt and UV rays.

• Self Fusing
• 600psi tensile strength
• Permanent Seal
• Resists 260°C

• Waterproof and Airtight
• Can be applied on wet surfaces
• Never gets gummy or sticky
• Insulates 8,000 volts with 50% overlapped

For: plumbing, general industry, military, agricultural industry and marine industry
Dimensions: 25.4mm (W) x 3.05m (L) x 0.5mm (T)