Liquid Absorbant Powder

Liquid Absorbant Powder

Flowtech LAP is a non-toxic inert blend of minerals that are combined in a manufacturing process to make the most effective and efficient absorbent available. The product contains no hazardous ingredients as defined by the Health and Safety at Work Act 1974 and the World Health Organization.

Flowtech LAP is an essential addition to your spill prevention needs. Spill impacts such as Oils, Paints, Solvents or other liquids can immediately be reduced by its use.

Use is simple just pour on, the product turns any wet spill into a dry powder that can be vacuumed or swept to remove. The product is useful in the Work Shop, Garage, Vehicle, Utility or any other room where you may have a spill.

Flowtech LAP is a non-toxic, non-flammable and environmentally safe and friendly. The product wont harm asphalt, cement, carpet, tile, soil, animal or plant life.

A safe product for the workplace it leaves no residue meaning no slip hazards and is non-carcinogenic.

A bag of Flowtech LAP is equivalent to three or more 50lb bags of clay based absorbents. Cost savings realized can range from 25% to 75% depending on the cost of disposal for a particular liquid.

When Using Flowtech LAP with... Paint when cleaning up a paint spill, speed is most important. However if the paint has begun to dry, use paint thinner for oil based and water based to re-wet the spill. Then follow the standard how to use instructions. A medium to stiff bristle brush is recommended for this application.

Petroleum Products
Petrol / Diesel
These products absorbed with Flowtech LAP will still be flammable, however the product will decrease flammability immediately but not completely.

Hydraulic / Brake and Transmission Fluid / Motor Oil
Follow how to use instructions. Flowtech LAP becomes saturated when you can no longer see any white powder. If the product turns to a paste, remove the top coat and re-apply.

Motor Oil / Existing Stains
Re-Wet the stain with a degreaser, work in with a broom. Immediately follow standard instructions. Repeat until stain is mostly removed.

Grease
This can be a multi-step process. The first step is to remove what you can. The re-apply and continue until grease is absorbed . If Flowtech LAP turns to a paste remove the top coat and re-apply. If the spill is large the back of a garden rake or similar instrument may help cut into the spill easier.